How Long Will Your Windshield Washer Nozzles Last?

Your security is the leading priority while you’re behind the wheel. Due to this, car manufacturers came up with various safety measures to boost the ease of navigation and visibility of the road. One of these is the windshield washer nozzle.

These tiny nozzles protrude from the part of the hood closest to the windshield and are connected to a fluid container. When you trigger the nozzle, it will spritz the fluid into the windshield. You will then wipe it off with the wiper.

Windshield washer nozzles are intended to help you clean windshield dirt while driving. But the question is this: how long will it last?

The lifespan of windshield washer nozzles

Usually, these nozzles are made to last as long as the car’s lifespan. Still, it can start to malfunction at some point due to various factors.

Most of the time, these nozzles are rarely checked, which will lead to stagnation. Also, it’s exposed to outdoor elements which will contribute to faster wear and tear.

If the nozzles are physically damaged, you’ll need to have it replaced. In some cases, the nozzles may look good but still malfunction. You should watch out for the following symptoms:

-No fluid is coming out

-The fluid comes out in small spurts as if it’s blocked

-Its spray pattern is too wide

A professional mechanic should address these problems. You can also perform a simple troubleshooting process like our steps below.

Troubleshooting a washer nozzle

-Look for blockage

Sometimes, the external part of the nozzle is just blocked. Try poking it gently to scrape off or flush out the dirt. If this didn’t work, proceed to the next troubleshooting steps below.

-Check the fluid level

There’s a chance that the fluid has already run out, which is why the nozzle doesn’t spray enough into the windshield. Just refill it and check if the nozzle will function normally. If the washer nozzle works fine, it’s possible that refilling is the only thing needed.

-Check the hose

It’s possible that there’s a leak or a blockage on the hose that transmits the fluid to the nozzle. You have to replace or clean this to bring back the function of the nozzle. This should be easy to fix even without the intervention of a mechanic.

-Consider electrical problems

If the nozzle, fluid, and hose are fine, the electrical power may be at fault. The nozzle system could have been disconnected from the power source, resulting in its failure to function.

-Check for dirt

Look at the reservoir and see if too much dust has accumulated on it. Sometimes, too much muck has built upon the reservoir, which prevents the fluid from getting into the nozzles.

Final words

If a part of your car breaks down, the washer nozzles, for example, you should have it repaired right away. This will save you from the hassle in the future when you need the component to function. The windshield washer nozzle might be a small thing, but it helps improve the visibility of your windshield.