What Size Windshield Wipers Do You Need?

Imagine you’re driving in heavy rain. Nothing could be worse than struggling to get a clear view of the road, simply because your windshield wipers are not doing an effective job of removing most of the surface water.

The wipers you have are probably not the right size for your vehicle. Now you might wonder how or why they would even find their way to your windshield. After all, shouldn’t a car be equipped with properly sized wipers? But this isn’t uncommon at all, especially if you’ve replaced the wipers at least once, or have had some work done on them. You’ll only notice they’re the wrong size when there is heavy rain or snow. By that time, you will have problems with road visibility and realize just how important they are in driving safety.


Why You Need the Right Sized Windshield Wipers

Wipers that are not properly fitted can cause irreversible damage to your windshield. In a worst-case scenario, they might not function as efficiently and leave water and snow in their trail. These can obstruct your view and make you prone to road accidents since you’ll have difficulty seeing the road, other vehicles, and pedestrians.

Windshield wipers can malfunction for a variety of reasons. The most common of which is general wear and tear. It can also result from a faulty repair or improper replacement.


How to Choose the Right Windshield Wiper Size

Windshield wipers that are damaged or malfunctioning have to be replaced. If you want to know what size you should get, here is a simple guide on choosing windshield wipers.


Tip #1: Check with your vehicle’s manufacturer

Windshield wipers are usually designed for a specific car model and make. This means that manufacturers have a set standard depending on your vehicle. In which case, it should be easier for you to narrow down the search to wiper blades that are compatible with your car.


Tip #2: Find out the blade symmetry

Most vehicles are pre-installed with windshield wipers that are similar in size. Some have one larger blade along with a slightly smaller one. So how do you know which settings are for your vehicle? You can refer to the manual that came with your car, or you can consult online forums on DIY repairs.

You may think this is a very small technicality that can be ignored. But failure to follow these specifications will prevent your wipers from functioning properly. In turn, they can impair your road visibility and speed up the wear and tear of your brand new wiper blades.


Tip #3: Know what’s compatible with your car’s features

Newer vehicles will have water and soap sprayers built into the frame, whereas older models will not feature them. Knowing whether your vehicle has these features will help you choose. Modern wipers tend to be incompatible with old cars, whereas dated wipers will be unusable on modern vehicles.

All of that being said, it’s also imperative that you replace your windshield wipers whenever they are no longer functioning at peak efficiency. If you notice any streaking noises while operating your wipers, or if they’ve begun to leave a thin film after every wipe, these are tell-tale signs that a replacement is needed.